The Teradek Cube 450 is an HDMI decoder featuring dual band (2.4/5.8 GHz) WiFi, improving the range and video quality in congestion environments. The Cube 450 also has an external USB port, allowing users to stream video over WiFi at fixed locations, and use a 4G Verizon LTE USB modem to stream on-the-go (USA only). Cube 450 features adjustable Mic level input with optional AGC and compression. This model is ideal for news gathering and live event broadcasting.
The Cube Decoder features extremely low power consumption and a small form-factor that is ideal for mobile applications, thus using a Cube Decoder eliminates the need for using a PC to receive and decode video.
Simple Setup
Cube's web interface features a Setup Wizard to simplify configuration. After connecting video and powering-up Cube, create a network, logon to Cube's web interface, complete the Setup Wizard, and begin streaming video.
Advanced Compression
Cube uses the world's most advanced video compression – H.264 High Profile Level 4.1 and provides Blu-ray video quality. Cube's end-to-end latency is approximately 250 ms.*
Small Size
Cube is tiny (about the size of a pack of cards), uses only 2.5W of DC power, weighs a mere 198 gms and mounts easily to a rail system, cage, hotshoe, or camera baseplate. Cube's line-of-sight WiFi range is approximately 300 feet when used with a high quality WiFi access point. Cube has been tested extensively with RED ONE, Arri Alexa, Panavision Genesis, Canon 5Dii, Canon 7D, various handi-cams and more.
Supported Input Resolutions
- 1080p/PsF @ 23.98/24/25/29.97/30Hz
- 1080i @ 50/59.94/60Hz
- 720p @ 50/59.94/60Hz
Streaming Output Resolutions
Cube features a built-in scaler to downscale to lower resolutions
- 1080p/PsF @ 23.98/24/25/29.97/30Hz
- 1080i @ 50/59.94/60Hz
- 720p @ 50/59.94/60Hz
- 480p @ 50/59.94/60Hz
Video Codec
- Compression Algorithm: High Profile H.264 (L4.1), MJPEG
- Bit Rate: 250 Kbps to 10 Mbps
Audio
- Embedded Stereo over HD-HDMI
- 1/8” Stereo TRS Line Level input
- Audio Compression: AAC-LC, MPEG Layer 2
Network
- Ethernet: 10/100BASE-T
- Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
- Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS*, HTTP Live Steaming
- Feature-rich WebUI for configuration and control
- Point to Point (TCP or UDP), Multiple Unicast (UDP), or
- Multicast (UDP+IGMP)*
Physical
- Dimensions: (W x D x H) 63.5 x 88.9 x 22.8 mm
- Weight: 198 gms.
- Nominal Power Consumption: 2.5W
- PoE: 802.3af Compliant
- Auxiliary Power Input: 9-24V DC
Environmental
- Temperature: 0 to +50 C
- Humidity: 95% non condensing
Interfaces
- USB 2.0: 1 Powered Port (Optional)
- WiFi: Internal 802.11n (Optional)
Box contents
- Teradek Cube 450
- Video cable
- Wireless antenna
- Mounting hardware
- 110-240 volt power supply
- Quick start guide
*Optional
Teradek CUBITS-500 Series Battery Adaptor Plates for Canon LP-E6 and Sony NPF-500/550 batteries ...
More info
Teradek CUBIT-600 Series Battery Adaptor Plates for Canon BP-970G, JVC BN-V438U, Panasonic CGA-D54 and VW-VBG6 & CGA-E/625 7.2 volt batteries ...
More info
Teradek CUBIT-600 Series Battery Adaptor Plates for Sony M and L series 7.2 volt batteries ...
More info
Teradek Cube 250, a camera-top HD H-264 encoder , with dual band (2.4/5.8 GHz) WiFi, external USB port, mic level input and HDMI socket and supports 480, 720 and 1080 inputs ...
More info
Teradek Cubelet 220-420, a camera top HDMI Encoder and Decoder with HDMI and a wired Ethernet input and output and built in WiFi ...
More info
Teradek CUBIT PowerTap adaptor cable available in a 450 length and terminated with a Lemo connector ...
More info
Teradek CUBITS-020 Antenna extension cable for Cube video encoders/decoders ...
More info
CUBITS-056 extra Universal power supply for Cube encoders/decoders with a 1.8 metre cable terminated in a Lemo connector ...
More info