CUBE-300: 1ch HD-SDI Decoder
Teradek's Cube Decoder is a small, extremely low-power video decoder that pairs ideally with the Teradek Cube 100 Encoder. Together they provide an end-to-end streaming video solution for filmmaking, news gathering, and ProAV.

The Cube Decoder features extremely low power consumption and a small form-factor that is ideal for mobile applications, thus using a Cube Decoder eliminates the need for using a PC to receive and decode video.

Simple Setup
Cube's web interface features a Setup Wizard to simplify configuration. After connecting video and powering-up Cube, create a network, logon to Cube's web interface, complete the Setup Wizard, and begin streaming video.

Advanced Compression
Cube uses the world's most advanced video compression – H.264 High Profile Level 4.1 and provides Blu-ray video quality. Cube's end-to-end latency is approximately 250 ms.*

Small Size
Cube is tiny (about the size of a pack of cards), uses only 2.5W of DC power, weighs a mere 198 gms and mounts easily to a rail system, cage, hotshoe, or camera baseplate. Cube's line-of-sight WiFi range is approximately 300 feet when used with a high quality WiFi access point. Cube has been tested extensively with RED ONE, Arri Alexa, Panavision Genesis, Canon 5Dii, Canon 7D, various handi-cams and more.

*Latency measured by independent third party testers. iPad's native video decoder adds approximately 10 seconds of latency. An RTP solution for iPad will be available shortly to eliminate the latency issue.

Supported Input Resolutions

• 1080p/PsF @ 23.98/24/25/29.97/30Hz
• 1080i @ 50/59.94/60Hz
• 720p @ 50/59.94/60Hz

Streaming Output Resolutions
Cube features a built-in scaler to downscale to lower resolutions

• 1080p/PsF @ 23.98/24/25/29.97/30Hz
• 1080i @ 50/59.94/60Hz
• 720p @ 50/59.94/60Hz
• 480p @ 50/59.94/60Hz

Video Codec

• Compression Algorithm: High Profile H.264 (L4.1), MJPEG
• Bit Rate: 250 Kbps to 10 Mbps

Audio

• Embedded Stereo over HD-SDI
• 1/8” Stereo TRS Line Level input
• Audio Compression: AAC-LC, MPEG Layer 2

Network

• Ethernet: 10/100BASE-T
• Network Protocols: TCP/IP, UDP, HTTP, DHCP, NTP, SSL, IGMP
• Transport Protocols: RTP, RTSP, RTP over HTTP, MPEG-TS*, HTTP Live Steaming
• Feature-rich WebUI for configuration and control
• Point to Point (TCP or UDP), Multiple Unicast (UDP), or
• Multicast (UDP+IGMP)*

Physical

• Dimensions: (W x D x H) 63.5 x 88.9 x 22.8 mm
• Weight: 198 gms.
• Nominal Power Consumption: 2.5W
• PoE: 802.3af Compliant
• Auxiliary Power Input: 9-24V DC

Environmental

• Temperature: 0 to +50 C
• Humidity: 95% non condensing

Interfaces

• USB 2.0: 1 Powered Port (Optional)
• WiFi: Internal 802.11n (Optional)

Box contents

• Teradek Cube 300
• Video cable
• Mounting hardware
• 110-240 volt power supply
• Quick start guide

*Optional